Junyoung Park

CV

Updated Nov 2026
Updated Nov 2026

Research Interests

  • Structural condition assessment from field measurements to support maintenance decisions
  • Inverse problems and parameter estimation in structural systems
  • Probabilistic modeling of uncertainty in structural measurements and models
  • Long-term field monitoring of in-service structures (bridges, pavements, ports, precast members)

Education

M.S. in Civil Engineering (Structural Engineering), Chung-Ang University, Seoul, Republic of Korea

  • Thesis: A Scalable Bridge Health Monitoring System using an IoT Sensor and Cloud Computing Read Thesis
  • Advisor: the late Prof. Jong-Woong Park
  • GPA 4.39 / 4.5
Selected Coursework

Structural Engineering

  • Concrete Time-Dependent Behavior
  • Advanced Steel Structures
  • Structural Dynamics
  • Bridge Design Special Topics

Systems and Data

  • Linear Control Systems
  • Sensor and Measurement Methods
  • Introduction to Machine Learning and Deep Learning
  • Computer Programming and AI Applications

B.S. in Civil Engineering & B.S. in Mathematics (Double Degree), Chung-Ang University, Seoul, Republic of Korea

  • GPA 4.20 / 4.5 (summa cum laude)
  • Undergraduate thesis: Development of Low-power IoT Sensor and a Cloud-based Data Fusion Displacement Estimation Method for Ambient Bridge Monitoring
Selected Coursework

Civil Engineering

  • Materials Mechanics
  • Materials Mechanics Lab
  • Open Channel Hydraulics
  • Soil Mechanics I-II
  • Soil Mechanics Lab I-II
  • Rock Mechanics
  • Surveying and Surveying Practice
  • Construction Planning and Execution
  • Structural Mechanics
  • Reinforced Concrete Engineering
  • Geotechnical Design
  • Civil Infrastructure Capstone Design

Mathematics

  • Calculus
  • Linear Algebra
  • Statistics
  • Numerical Analysis
  • Geometry
  • Differential Equations I-II
  • Differential Geometry I-II
  • Analysis I-II
  • Topology I-II
  • Partial Differential Equations
  • Modern Algebra
  • Probability and Statistics
  • Python Basics and Machine Learning Lab
  • Basic Scientific Data Analysis

Research Experience

Researcher, UDNS Co., Ltd., R&D Division

Industrial Technical Personnel Program (R&D-based alternative to military service), Republic of Korea

Plate-type high-speed weigh-in-motion (HS-WIM) system development and field validation (MOLIT)2024 – Present

  • Co-designed the multi-channel signal acquisition PCB for the load cells.
  • Developed signal-processing algorithms that extract axle load, gross weight, speed, and vehicle dimensions from raw sensor signals, combining automatic load-segment detection with FIR-filtered dynamic weight estimation.
  • Conducted on-road field tests with loaded trucks to reduce estimation error across vehicle class, speed, and payload.

HS-WIM signal analysis and accuracy improvement (MOLIT)2024 – Present

  • Developed deep-learning-based fault-tolerant reconstruction of multi-channel HS-WIM signals.
  • Analyzed paired HS-WIM and on-board mass signals toward auto-calibration without a reference scale.
  • Analyzed traffic patterns from a year of continuous HS-WIM measurements, characterizing vehicle class and gross weight by time of day and season.

On-board mass (OBM) system for real-time heavy-vehicle load monitoring2024 – Present

  • Improved dynamic weight estimation accuracy by estimating payload from multi-channel suspension sensors and compensating vehicle dynamic effects with IMU signals.
  • Conducted environmental, EMC, and ingress-protection testing for TCA Category B type approval.
  • Defined the communication protocol between the network module and the mobile application, and modified the Android application accordingly.

Graduate Researcher, Smart Infrastructure Technology Laboratory, Chung-Ang University

Long-term monitoring of in-service bridges (Seoul Metropolitan Government; M.S. thesis)2020 – 2024

  • Designed JANET, a low-power IoT sensor: 24-bit three-axis accelerometer, eight strain channels, 0.34 mA standby, direct LTE Cat-1 communication.
  • Instrumented Seongsan, Paldang, Seosomun, and Jamsu bridges and collected over one year of continuous data under live traffic at 1 kHz across eight channels (3-axis acceleration, four strain, temperature).
  • Built and operated a scalable data pipeline and dashboards serving all four bridges from a single cloud back end.
  • Tracked natural frequencies over a year, where seasonal temperature variation dominated the observed shifts.
  • Validated sensor-fusion displacement estimation against a laser displacement sensor reference, achieving under 1% error.

Bridge load testing and load-carrying capacity evaluation (MOLIT)2020 – 2024

  • Developed a portable multimetric sensing system (JANET) and web-based document automation for capacity evaluation.
  • Devised an automatic load-event interval recognition method for continuous load-carrying capacity assessment.

Monitoring of precast members during transportation and construction (MOLIT)2020 – 2024

  • Developed a portable gateway-and-JANET system for real-time safety monitoring of prefabricated members in transit.
  • Monitored acceleration, tilt, strain, and temperature throughout lifting, loading, and transport, with chatbot anomaly alerts.

Strain visualization module with E-paper QR display (MOLIT)2021 – 2024

  • Developed an ultra-low-power multi-channel module that records strain history from fabrication to service and holds it on an embedded E-paper display that remains readable with no power.
  • Built a chatbot-based QR acquisition pipeline and automated reporting.

Smart port berthing monitoring (MOLIT)2021 – 2023

  • Developed a wireless sensing system for long-term monitoring of caisson-type quay walls, integrating a high-sensitivity accelerometer with tilt, temperature, camera, and rangefinder modules.
  • Triggered vibration measurement on vessel berthing and unberthing, with an AI classifier to identify quay-wall events.

Self-stress sensing circuit for ultra-high-performance concrete (NRF)2020 – 2021

  • Designed a low-cost multi-channel wireless sensing circuit that infers the loading state of self-sensing concrete from resistance change.

Low-cost IoT seismic sensor (NRF)2019

  • Designed an ultra-low-power seismic sensor built for under $50 per unit.
  • Developed a two-phase detection algorithm: STA/LTA screening in the time domain, then classification by spectral content.

Visiting Researcher, University of Hawaii at Manoa, Dept. of Civil, Environmental and Construction Engineering (two-week visit hosted by Prof. DoSoo Moon)

  • Implemented GPS-based time synchronization on JANET for multi-point road-surface vibration measurement.
  • Configured and demonstrated the measurement setup for the host lab, and gave a lab seminar on the sensing platform.

Skills & Languages

Programming Python, MATLAB, C, JavaScript / Node.js
Machine Learning PyTorch, scikit-learn, pandas, NumPy
Hardware & Design Altium Designer, SolidWorks, LabVIEW
Software & Data Web dashboards, Android app modification, PyQt (desktop GUI), AWS, Docker, MySQL, InfluxDB, Grafana
Languages English (TOEFL iBT 100/120, C1, 2026), Korean (native)